Dodge Durango 2013-2020 Spark Plug replacement

spark plug for dodge durango
Are you looking for a quick and easy-to-follow tutorial to replace the spark plugs on your 2013-2020 Dodge Durango? In the following article we explain step by step so that you can do it from the comfort of your home and be able to install the spare parts successfully. If you’d rather have a professional handle it, our mobile tune-up service comes to you anywhere in the Davie area. Before continuing, check the following list to see if your Durango model is available in this manual:

Spark plugs, especially, are among the easiest parts to replace in any given engine. All it requires is carefully following some basic steps and a handful of basic tools. Let’s dig into the removal process: 

Dodge Durango 5.7L spark plug removal

  1. Remove the necessary air filter tubing and air intake components at the top of the engine, and at the throttle body.
  2. Prior to removing the ignition coil, spray compressed air around the coil base at the cylinder head.
  3. Remove the ignition coil.
  4. Prior to removing the spark plug, spray compressed air into the cylinder head opening.
  5. Remove the spark plug from the cylinder head using a quality socket with a rubber or foam insert.
  6. Inspect spark plug condition. 

Transparency and pofessionalism
are at the forefront of all our
Mobile Brake Services.

An expert auto brake repair broward county

Durango 2013-2020 Spark Plugs Installation

Caution: Never use a motorized wire wheel brush to clean spark plugs. Metallic deposits will remain on spark plug insulator and will cause plug misfire.

Caution: Do not attempt to clean any of the spark plugs. (Dodge Durango Spark Plugs 5.7L)

1. To aid in the coil installlation, apply silicone based grease such as mopar dielectric grease into the spark plug end of the igntion coil rubber boots. Also apply this grease to the tops of spark plugs.

2. Check and adjust the spark plug gap with a gap gauging tool. See the spark plug specification section for plug gap.

3. Start the spark plug into the cylinder head by hand to avoid cross threading. Special care should be taken when installing spark plugs into the cylinder head spark plug wells. Be sure the spark plugs do not drop into the plug wells as electrodes can be damaged.

4. Install the Ignition coil. (Dodge Durango Spark Plugs 5.7L)

You’re done! Before you celebrate, however, be sure to mark down the car’s current mileage in your maintenance notebook, so you’ll know when you need to change your spark plugs again. Although the process is quite simple, if you need a professional service, AutoTech Mobile offers a wide range of repair, maintenance and light mechanical installation services for all types of cars and brands with the possibility of requesting their expertise with direct attention in your garage. If you would rather skip the DIY route, our mobile tune-up service comes to you anywhere in the Davie area. Call (954) 826-5523 and we will have your Durango running its best.

SCHEDULE AN APPOINTMENT TODAY

Our Mobile Mechanic Services in The Broward County Area

DAVIE, PEMBROKE PINES, MIRAMAR, COOPER CITY, WESTON, SOUTHWEST RANCHES, PLANTATION, TAMARAC, SUNRISE,  FT LAUDERDALE

Davie Location

+600 positive reviews

Pembroke Pines Location

+240 positive reviews

What our clients says

Skip to content