Tips before starting
Safety first: keep in mind that to avoid accidents it is necessary that you use all the safety utensils before starting, such as: gloves, mask, mechanical boots, and even work in a suitable and clean place.
Preparations: you must have all the parts you are going to use on hand, spare parts, tools and more.
Tools: You are going to need some key tools to carry out the processes safely, such as: lug wrench, jack and jack stands, socket wrench set, C-clamp, brake pad grease and of course, the brake pads. replacement.
broward county
Honda Accord Brake Pads Removal
NOTE: Review the Service Precautions before doing repairs or service:
- Vehicle – Lift
- Front Wheels – Remove
- Brake Pad – Remove
- Remove the housing clip (A).
2. Remove the caps (A).
3. Remove the pin bolts (B).
4. Remove the caliper body (C).
5. Remove the brake pads (A).
NOTE: Do not remove the brake pads unless you are replacing it. If the brake pads are removed, the adhesive tape cannot be reused and the brake pads must be replaced.
6. Clean the caliper bracket (B) thoroughly; remove any rust, and check for grooves and cracks.
7. Clean and degrease the outer supporting part
Transparency and pofessionalism
are at the forefront of all our
Mobile Brake Services.
Honda Accord Brake Pads Removal
NOTE: How to read the torque specifications .
Review the Service Precautions before doing repairs or service.
- Install the brake caliper piston compressor tool (A) on the caliper body (B).
- Press in the piston with the brake caliper piston compressor tool.
Remove the brake caliper piston compressor tool.
4. Apply a thin coat of ATE plastilube paste (included in the front pad set or commercially available) to the brake pads mating surface of the caliper bracket (indicated by the arrows).
5. When installing new brake pads, peel the backing paper (A) off the outer brake pad to expose the adhesive on the shim
NOTE:
- Do not touch the adhesive when installing the brake pad.
- Keep dirt or other contaminants off the adhesive.
- Before installing the brake pads, make sure there is no grease on the outer support area (B).
6. Install the brake pads (C) to the caliper body (D) correctly with the wear indicator (E) on the upper inside position.
7. Install the caliper body (A).
8. Install the pin bolts (B).
9. Install the caps (C).
SCHEDULE AN APPOINTMENT TODAY
Our Mobile Mechanic Services in The Broward County Area
DAVIE, PEMBROKE PINES, MIRAMAR, COOPER CITY, WESTON, SOUTHWEST RANCHES, PLANTATION, TAMARAC, SUNRISE, FT LAUDERDALE
Davie Location
+600 positive reviews
Pembroke Pines Location
+240 positive reviews
What our clients says